//PoScope basic 2

PoScope basic 2

Description

These product was replaced with improved  PoScopeMega1.

  • 1 PoScope Basic2
  • 1 USB cable

Using the Plug and Play USB technology, the PoScope Basic2 oscilloscope is easy to setup and use. The software is a fully featured oscilloscope, chart recorder, logic generator, logic analyser, and spectrum analyser with advanced trigering all in one easy to use package. Software in English, French, German, Italian and Spanish language.

Low current consumption: 40mA.

2-channels oscilloscope

  • Sample rate: 100 Hz – 200 kHz
  • Input voltage: -20 – +20 V
  • ADC capacity: 10 bits
  • Triggering: absolute, differential, external
  • Window functions: Hamming, Hanning, Blackman, Blackman-Harris

2-channels spectrum analyzer

  • Sample rate: 100 Hz – 200 kHz
  • Input voltage: -20 – +20 V
  • ADC capacity: 10 bits
  • Triggering: absolute, differential, external
  • Window functions: Hamming, Hanning, Blackman, Blackman-Harris

16-channels logic analyzer

  • Sample rate: 1 KHz – 8 MHz
  • Input voltage: 0 – 5V
  • Triggering: edge, level, mask
  • Decoding: UART, SPI, I2C and 1-Wire

2-channels recorder

  • Marker measurements
  • Option to add 99 markers with comments
  • Maximum, minimum and average voltage measurement for each channel
  • Waveform record within several tens of hours

5 channels square signal and PWM generator

  • Frequency: 3,91 kHz – 1 Mhz
  • Duty cycle: 1- 99% f=7,8125 kHz

8-channels pattern generator

  • Sample rate: 1 KHz – 1 MHz
  • Memory depth: 1544 bit/channel
  • Output voltage: logic 0 = 0V, logic 1 = 3.3 V
  • Maximum input/output current: 10 mA
  • Minimum resolution 1024×[email protected]
  • RAM 512 MB
  • Processor 1GHz
  • Windows Xp, Vista
  • free USB slot

Additional information

Dimensions 1 × 1 × 1 cm

Downloads

SOFTWARE

setup_poscope3_32-bit_2.zip
setup_poscope3_64-bit_4.zip

MANUALS

poscope3install_1.pdf